Hi everybody,
I have a problem for the enrollment device in Airwatch.
The IPad is in DEP and when I enter the credential (with or without a configuration profil) i have this error: "Invalid Profil".
When I test with an IPhone IOS12, i don't have the probleme.
Can you help me please?
Hi
I've not been able to find anything in Airwatch to do the following but would appreciate if anyone knows different:
Is it possible to restrict iOS devices from connecting to Open wifi networks or Wifi with a Captive portal ? Our devices are all supervised by Configurator 2 but we cannot use the Whitelist Wifi function as we have too many networks allowed.
Also is it the case that devices have to be in DEP in order to prevent the removal of Airwatch MDM ? I believe so. I've removed the Unenrol option in Hub but they can remove the profile.
Thanks
Adam.
I can't get any USB 3 / USB C devices to mount in a Win10 VM. I'm not sure if this started with upgrade to Fusion 11 and/or Catalina (MacBook Pro 2018)???
I've read several articles with similar issues and no real fix. When I plug in a USB 3 or C device it prompts to connect to Windows, It tries to mount, "bonks", several times, them the USB3 controlled shows (yellow !). I've tried uninstalling and reinstalling the controller/driver, all of them, with no luck.
Any suggestions?
Hi All,
I've got the latest version of VM Workstation Pro and i need to convert my image to a .wim file for use with MS Deployment tools. What would be the easiest way to convert it ?
Many Thanks
Ollie
I did a fresh install of the latest Horizons View Mac Client and attempted to start the USB Arbitrator for USB Redirection. I was having trouble getting the USB devices to show up in the dropdown menu, so I enabled logging following the instructions at https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/techpaper/vmware-horizon-view-usb-device-redirection.p…
For the vmware-usbarb-<PID>.log files, I get the following
2020-05-07T08:21:44.403-08:00| usbArb| I125: Log for VMware USB Arbitration Service pid=17262 version=e.x.p build=build-15762035 option=Release
2020-05-07T08:21:44.403-08:00| usbArb| I125: The process is 64-bit.
2020-05-07T08:21:44.403-08:00| usbArb| I125: Host codepage=UTF-8 encoding=UTF-8
2020-05-07T08:21:44.403-08:00| usbArb| I125: Host is Mac OS X 10.15.4 (19E287) Darwin 19.4.0
2020-05-07T08:21:44.402-08:00| usbArb| I125: VTHREAD 4465405376 "usbArb" tid 119950
2020-05-07T08:21:44.403-08:00| usbArb| I125: DictionaryLoad: Cannot open file "/Library/Preferences/VMware Fusion/config": No such file or directory.
2020-05-07T08:21:44.403-08:00| usbArb| I125: [msg.dictionary.load.openFailed] Cannot open file "/Library/Preferences/VMware Fusion/config": No such file or directory.
2020-05-07T08:21:44.403-08:00| usbArb| I125: PREF Optional preferences file not found at /Library/Preferences/VMware Fusion/config. Using default values.
2020-05-07T08:21:44.404-08:00| usbArb| I125: DICT --- GLOBAL SETTINGS (null)
2020-05-07T08:21:44.404-08:00| usbArb| I125: DICT --- NON PERSISTENT (null)
2020-05-07T08:21:44.404-08:00| usbArb| I125: DICT --- HOST DEFAULTS /Library/Preferences/VMware Fusion/config
2020-05-07T08:21:44.404-08:00| usbArb| I125: DICT --- SITE DEFAULTS (null)
2020-05-07T08:21:44.405-08:00| usbArb| W115: USBArbRuleStore: Unable to open rules file '/Library/Application Support/VMware/usbarb.rules': Could not find the file
2020-05-07T08:21:44.405-08:00| usbArb| I125: VMware USB Arbitration Service Version 19.2.0
2020-05-07T08:21:44.405-08:00| machPoll| I125: VTHREAD 123145389735936 "machPoll" tid 119952
2020-05-07T08:21:44.700-08:00| usbArb| W115: USBArbM: Failed to load 'com.vmware.kext.vmioplug.19.2.0' from 'file:///var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/viewclientmac.9jXYFB65/kexts/vmioplug.kext/'. (0xdc00801b)
2020-05-07T08:21:44.703-08:00| usbArb| W115: USBArbRuleStore: Unable to open rules file '/Library/Application Support/VMware/usbarb.rules': Could not find the file
2020-05-07T08:21:44.703-08:00| usbArb| W115: USBArb: usb-arbitrator exit with error: 1
I also have some extra logs from the USB Arbitrator Service and the Horizons client itself that I attached.
Does any have any ideas for getting the USB Arbitrator to start properly?
Hi all, I'm following the link below to remove NSX but i can't seem to find the directory "/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity/" on vCenter Appliance.
I'm already in the shell access but running "ls" gives me a different directory.
Safely Remove an NSX Installation
Hello,
We encountered a vmx crash problem when migrating a VM from one host to another. Both ESXi version of src and dst host are 6.5U2. The backend storage of the VM is an NFS datastore, working with the certified NAS-VAAI plugin: VMware Compatibility Guide - Storage/SAN Search
The vmware.log shows that an invalid address is accessed when opening a database connection (the VM has a .db file) during vMotion:
2020-04-18T07:02:01.303Z| vmx| I125: NamespaceMgrCheckpoint: opening database connection (Huayun_OU01.db).
2020-04-18T07:02:01Z[+0.052]| vmx| W115: Caught signal 11 -- tid 124426 (addr 28)
2020-04-18T07:02:01Z[+0.052]| vmx| I125: SIGNAL: rip 0xb47d8d7499 rsp 0x35978196518 rbp 0x359781965f0
2020-04-18T07:02:01Z[+0.052]| vmx| I125: SIGNAL: rax 0x28 rbx 0xb43c001900 rcx 0x0 rdx 0x8 rsi 0x3597819657c rdi 0x28
2020-04-18T07:02:01Z[+0.052]| vmx| I125: r8 0x0 r9 0x7 r10 0xfffffffffffff547 r11 0xb47d8d60d7 r12 0x35978196530 r13 0xb43b39bb7b r14 0x35978196532 r15 0x0
Some more tests show that:
1. Only a few VMs have this problem. For these VMs, storage vMotion from NFS datastore to another datastore is also failed, and has the same error log (accessing invalid addr 28).
2. If the VM is rebooted before migrating, migration could be successful.
Attachment is the vmware.log of the failed VM, and the zdump generated when vmx crashed.
Any comments are welcome.
Hello,
I am wondering if this a common issue and who can help.
Every second or third time a user connects to his VDI desktop, client drive redirection to his local computer's user profile is not mapped. When is logs off and back on OR just clicks the "X" and reconnects the running session, the drive is like mapped. Network connection between client, connection server and VDI desktop is good. Could not find anything related in the logs.
Running Horizon 7.8 with Windows 10 1809 pool using Horizon Agent 7.10 (Same on Agent 7.8)
Clients using Horizon Client version 5.2 or 5.3
As the issue occurs, also \\tsclient\<Username> is not reachable so it is not just the drive mapped to "My Computer".
Who's got a clue that the issue is?
Hi All,
I'm trying to set an alarm that will send me email for each new vm that is create, deploy or clone.
With the following parameters:
* Time
* VM name
* User name.
as you can see I couldn't find the parameter that will add the user name in the subject, Please help me!
Hi, I've been over a few threads but can't fix it thus far.
I'm running Fusion11.5 on OS 10.15.4 Catalina, I have agreed and added VMfusion within the system preferences to
SystemPreferences > Security&Privacy > Accessibility (& Full disk access)
VMfusion is up and windows running, I mount the drive, VM asks to run on windows > yes > but it doesn't register. ( windows makes the sounds of a drive being plugged and unplugged ). I can't unmount with within disk management although I can't see it, then is mounts to the Mac desktop.
Any insights?
Many thanks
This is regarding WS1 SaaS (20.4.0.2 (2004)) Android Enterprise managed devices deployed with an Application profile that enables the use of whitelisted System Apps.
The whitelisting works , but I also want to be able to manage the updates centrally from the WS1 dashboard, i.e. push update like is done with regularly managed Apps.
Is there a way to do that?
regards!
JV
Sorry' I'm not good at english.
Hello
I using vmware workstation pro 15 and have been compact disk. I saved workstation on my external hard disk, during compact processing 80% my hard drive usb it accident disconnect. I'm try to power on my workstation it show error "insufficient permissions" this point i just remove .lck file and it gave me error "The specified virtual disk needs repair" for vmware-vdiskmanager.exe method it not working for me with error "the virtual disk, Workstation.vmdk is corrupted and cannot be repaired"
Hi,
I am on WSO version 20.1.10 on prem. We just got word that MS Teams Version 2.09 for iOS is breaking incoming calling. Is there a way I can prevent people from downloading this version? It only seems I have the ability to push an update not prevent one from installing.
We have an incident where after upgrading our Supermciro to the latest 6.5 ESXi release where ESXi is not seeing the internal SAS drives.
Internal SAS controller is not seeing the drives. Prior to the ESXi update, vCenter was showing under Storage Adapters, MegaRAID SAS Invader Controller with Storage Device Local AVAGO disk.
I booted the ESXi server and went into the RAID utility. All of the drives show on-line and active with no failures.
I checked with the vendor and we tried a new backplane riser card. Did not help. He said if the drives are seen by the controller, then he thinks the problem is not a hardware issue.
He thinks there is some disconnect in the ESXi somewhere …especially since the only two hardware pieces it could be at this point are backplane and motherboard. However, the internal SATA drives are working fine, so that really rules out the backplane and motherboard.
Has anyone seen anything like this after upgrading ESXi 6.5?
Anyone see something similar?
thanks
When I connect my esxi host by remote location give no peer certificate found
I have a vCSA + 3 ESXi on same cluster and a few days ago, I checked status in vSAN and I see that many components takes very long time to succesfully resync.
Despite of doing the action via vSphere Web Client to repair objects inmediately, did not work.
I see many post in this forum and I check that there would be commands like vsan.resync... It affects to normal functionality of VMs in the moment you put these commands?
Is there a way to check, how to repair these object manually? On the other hand, the VMs, ESXi and vCSA works OK, but for example when I try to clone a VM with resync components already working, there is no way, it fails to do the process (I understand because in this moment is doing resync components).
Thanks in advance. Regards!
I have used this script for a few years to find now it is just producing an empty report. When I review it the script it pulling:
$vmdiskFolder=($vmdiskfilename | %{$_.Split('/')[0]})
| ~~~~~~~~~~~~~~~~
| You cannot call a method on a null-valued expression.
I am not sure what variable isn't pulling data from correctly though to investigate.
Connect-VIServer $VC -Credential $Cred
#############################
# Variables #
#############################
$date=Get-Date -format "yyyy-MMM-d"
$datetime=Get-Date
$filelocation="/var/www/VMDK/VMDK-$date.htm"
#############################
# Content #
#############################
#Determine if already connected to VCenter and if not connect
if ( $DefaultVIServers.Length -lt 1 )
{
Connect-VIServer -Server $ESXserver -User $ESXuser -Password $ESXpassword -WarningAction SilentlyContinue | Out-Null
}
# Format html report
$htmlReport = @"
<style type='text/css'>
.heading {
color:#0B1ABF;
font-size:14.0pt;
font-weight:700;
font-family:Verdana, sans-serif;
text-align:left;
vertical-align:middle;
height:20.0pt;
width:416pt;
}
.colnames {
color:white;
font-size:11.0pt;
font-weight:700;
font-family:Tahoma, sans-serif;
text-align:center;
vertical-align:middle;
border:.5pt solid windowtext;
background:#730000;
}
.lblueback {
color:windowtext;
font-size:10.0pt;
font-family:Arial;
text-align:left;
vertical-align:middle;
border:.5pt solid windowtext;
background:#B8CCE4;
}
.greyback {
color:windowtext;
font-size:10.0pt;
font-family:Arial;
text-align:left;
vertical-align:middle;
border:.5pt solid windowtext;
#background:#D8D8D8;
}
</style>
<table style='border-collapse:collapse;table-layout:auto;width:auto;padding:5px'>
<tr style='height:15.0pt'>
<th colspan=6 height=40 width=auto class="heading">
<center> VM Datastore Report </center></th>
</tr>
<tr>
<th class="colnames">VM Name</th>
<th class="colnames">Host</th>
<th class="colnames">DataStore</th>
<th class="colnames">Folder</th>
<th class="colnames">FileName</th>
<th class="colnames">Size/GB</th>
</tr>
"@
#get a list of VMs
$vmlist = Get-VM -Server $ESXserver | where { $_.Name -notmatch "_replica" } | Sort
#counter to manage alternating row color
$colorcounter = 0
#Master part of the script, loops through each VM and creates table with data
ForEach ($vm in $vmlist)
{
#If loop to determine color of Rows related to given VM
if ($colorcounter%2 -eq 0)
{
$tablecell = @"
<td class='lblueback'>
"@
}
else
{
$tablecell = @"
<td class='greyback'>
"@
}
# Grab VMDK information and the Datastores tied to them.
$vmdisk = Get-VM $vm | Get-harddisk
# Split out disks where a VM has more than a single disk, also split out the name of the Datastore
# from the name/path of the vmdk file, then split the Folder Name from the VMDK name.
$vmdiskDatastore=($vmdisk | %{$_.Filename.Split('[]')[1]})
$vmdiskfilename=($vmdisk | %{$_.Filename.Split('[]')[2]})
$vmdiskFolder=($vmdiskfilename | %{$_.Split('/')[0]})
$vmdiskVMDK=($vmdiskfilename | %{$_.Split('/')[1]})
$vmdisksize=($vmdisk | %{$_.CapacityKB})
# determine the length of the array so we know if there was more than one hard drive for a given VM.
$count = $vmdiskfilename.count - 1
# Begin building the html report, inserting the name of the VM in the 1st Column and Host Name into the 2nd
$htmlReport = $htmlReport +
"<tr>" + $tablecell + $vm.Name + "</td>" +
$tablecell + $vm.host.Name + "</td>"
# Based on the number of hard drives in the count value the report is generated in one of two ways
if($count -le 0)
{
# There is only one hard drive so the values will not be in an array we just need to build the table row with data
$htmlReport = $htmlReport +
$tablecell + $vmdiskDatastore + "</td>" +
$tablecell + $vmdiskFolder + "</td>" +
$tablecell + $vmdiskVMDK + "</td>" +
$tablecell + $vmdisksize / 1MB + "</tr>"
}
else
{
# There is more than one hard drive, because of table formatting we handle the 1st row different from the 2nd row. Data is in an array.
$htmlReport = $htmlReport +
$tablecell + $vmdiskDatastore[0] + "</td>" +
$tablecell + $vmdiskFolder[0] + "</td>" +
$tablecell + $vmdiskVMDK[0] + "</td>" +
$tablecell + $vmdisksize[0] / 1MB + "</tr>"
# There is more than one hard drive so we will loop through the array and and place them in the report
$x=1
While($x -le $count)
{
$htmlReport = $htmlReport +
"<tr>" + $tablecell + "" + "</td>" +
$tablecell + "" + "</td>" +
$tablecell + $vmdiskDatastore[$x] + "</td>" +
$tablecell + $vmdiskFolder[$x] + "</td>" +
$tablecell + $vmdiskVMDK[$x] + "</td>" +
$tablecell + $vmdisksize[$x] / 1MB + "</tr>"
$x= $x+1
}
}
# value used in conjunction with Foreach and if loop to rotate color in table
$colorcounter = $colorcounter + 1
}
$htmlreport | Out-File -Append $filelocation
#############################
# Add Text to the HTML file #
#############################
ConvertTo-Html –title "VMware VMDK Check " –body "<H1>VMware VMDK Check</H1>" -head "<link rel='stylesheet' href='style.css' type='text/css' />" | Out-File -Append $filelocation
ConvertTo-Html –title "VMware VMDK Check " –body "<H4>Date and time</H4>",$datetime -head "<link rel='stylesheet' href='style.css' type='text/css' />" | Out-File -Append $filelocation
##############################
# Disconnect session from VC #
##############################
disconnect-viserver -confirm:$false
Hello,
I am trying to add a new VIProperty for PercentFree for the Guest disk. What would be the object type etc?
Thanks
I just installed a UAG 3.9 and am running Horizon Connection Server 7.12. All my Horizon Settings are green in the UAG to include PCOIP, Tunnel, Blast, UDP Tunnel Server, and most importantly Horizon Destination Server. It appears I'm all green with connectivity to my CS. When I register my UAG in the Horizon CS Admin console under Servers->Gateways, it remains unknown. The Version and IP Address are listed as N/A and it is unknown on the Dashboard. It is listed as External in the Gateway section of the Horizon CS Admin console. My UAG Name in the System Configuration Advanced Settings matches the name registered in the Horizon CS. They are both the FQDN of the UAG Appliance. Why won't it register as a Gateway with the Connection Server?
Hi all,
i´ve an doubt about a procedure i´ll need to do.
I´ve two linked vcenter on sso domain vsphere.local, and a Horizon view platform, have another two linked vcenter on another sso domain, and Horizon view plataform, that is vsphere.local too
I need the 4 vcenter connected to first sso domain vsphere.local, using the repoint to get all linked, horizon view will have any disruption?
tks.