Hi There
We have 3 blades (Dell M640) and one PowerEdge VRTX, VMware 6.7Update 1, We have spoke to Dell and there have recommended the following - update all drives on esxi and update all vmware on the blades and chassis.
I am thinking we should update the vmware 6.7 to update 3 first and see how it goes, also I ran the following cmd esxcli software vib list | grep qfle, and i see alot about the qfle3f driver for QLogic.
qfle3 1.0.69.0-1OEM.670.0.0.7535516 QLC VMwareCertified 2019-01-07
qfle3f 1.0.51.0-1OEM.670.0.0.7535516 QLC VMwareCertified 2019-01-07
qfle3i 1.0.16.0-1OEM.670.0.0.7535516 QLC VMwareCertified 2019-01-07
esxcli network nic list
Name PCI Device Driver Admin Status Link Status Speed Duplex MAC Address MTU Description
------ ------------ ------ ------------ ----------- ----- ------ ----------------- ---- ------------------------------------------------------------
vmnic0 0000:18:00.0 qfle3 Up Up 10000 Full dc:f4:01:06:ef:71 1500 QLogic Corporation NetXtreme II BCM57810 10 Gigabit Ethernet
vmnic1 0000:18:00.1 qfle3 Up Up 10000 Full dc:f4:01:06:ef:74 1500 QLogic Corporation NetXtreme II BCM57810 10 Gigabit Ethernet
Really looking for any recommendations or anyone else experiencing this issue before.
Thanks
John